General Features

ELECTRICAL FEED LUBRICATION
From 42 up to 700 V at 50 & 60 Hz 3-phase

From 110 up to 240 V at 50 & 60 Hz 1-phase

Perfect performance under inverter control
For life up to size 4
Long life from size 4.1 upwards
 
POLES
2, 4, 6, 8, 10 & 12 poles
 
CENTRIFUGAL FORCE
AMBIENT TEMPERATURE RANGE
From -20 up to +40 °C

THERMAL PROTECTION

Standard from size 10

From 100 up to 20,000 kg/adjusted at 80%Continuous adjusting from 0% to maximum 100%

DUTY
H d ti t i C tif IF
up to size 9 on request
 
MOUNTING CONFIGURATIONS
Any position
 
Heavy and continuous at maximum Centrifugal Force

MECHANICAL PROTECTION
IP 66.7
 
FINISH
Powder coated
Blue RAL 5010/Yellow RAL 1003

INSULATION CLASS

"F" standard

"H" on request 

TESTING

All units undergo a dynamic test-run (with unbalancedweights) before leaving the factory 

TROPICALISATION

Standard

Highlights / Advantages

STATOR HOUSING

• Aluminium Alloy up to frame size 6   
• Spheroidal Cast Iron GS 400/15 from size 7 upwards   
• Size 5, 6 and 7 available in both materials   
• Strong design thanks to the honeycomb structure with radial and axial ribs from underneath the base plate to the side of the housing   
• Vertical ribs allow additional surface area for dissipation of heat   
• Base plate foot mounting   
• Blank footprint is available to be drilled to match fixing dimensions of most other brands of vibrating motors   
• Four lifting lugs to accommodate any lifting position requirement   
• Large terminal box for easier access to wiring with axial inlet cable gland to minimize feeding cable vibration

BEARING HOUSING

• Cast Iron G30 for all sizes to allow for maximum clamping forces of bearings, thus maximizing bearing life
• Radial ribs to ensure maximum rigidity for the bearing housing and better heat dissipation
• Threaded extraction holes for ease in disassembly of bearing housing and bearings, no need for "hammers and torches"
• Labyrinth sealing system
• Machined to allow for improved axial o-ring sealing
• Grease nipples are located inside the weight covers to prevent damage
• Multiple lubrication channels are available

BEARINGS

• Premium quality sealed ball bearings up to frame size 4   
• Premium quality and very special logarithmic profile C4 cylindrical roller bearing (FAG-QP51/SKF-VQ015)   
• Polyamide cage up to size 12   
• Brass cage from size 13 upwards 

OTHER COMPONENTS

• Galvanized 8.8 class bolts   
• Schnorr steel washers   
• Metal cable gland and plug   
• Silicon rubber inside terminal box   
• Sponges to keep electrical feed wires free of vibration